DMS Control System
Koregaon, Satara, Maharashtra
SEND SMS
SEND EMAIL
Product Details:
| Display | Digital |
| Brand | DMS |
| Flow range | Upto 650 l/m |
| Application | Laboratory |
| Repetability | Up to 0.006% |
| Accurancy | Up to to 0.9% |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Display | Digital |
| Brand | DMS |
| Repetability | Upto 0.08% |
| Type | Integral / Remote Mounting / blind 4-20mA Transmitter |
| Enclosure | Aluminum Die-cast - for Amplifier / Transmitter |
| Cable Entries | 3 nos. for remote / integral Transmitter |
| Dimensions | 160 mm (L) x 100 mm (W) x 80 mm (D) (Head mount mounting) 64 mm (L) x 44 mm (W) x 35 mm (D) (remote |
| Cable Glands | PG-7 [Standard] |
| Power Supply | 110 V / 220 V AC |
| Temperature | 0-50 Degree C (Operating Ambient) |
| Voltage | 240 V |
| Media Pressure | 20kg/cm Square, 25 kg/cm |
| Media Temperature | PTFE LINER, 0 - 90 Degree C max, Hard Rubber LINER, 0 -90 Degree C max |
| Ambient Temp | 0 Degree C to 60 Degree C |
| Materials | Pipe SS 304 [non magnetic & without paint] |
| Electrodes | SS 316/SS 316L/ hastelloy C |
| Inner lining | PTFE / Hard rubber |
| Coil Housing | CS (Polyurethane Painted) |
We are leading manufacture for Full Bore Electromagnetic Flow Meter in process control instrumentation Maintenance free low cost, highly stable reliable & ideal flow meter suitable for wide ranges of liquid flow measurements the flow meter with low pressure. The measurement being based on ‘Faraday’s law of electromagnetic induction’ is independent of viscosity, density, pressure and temperature of the flowing media & measurement is a true volumetric flow measurement. Standard current output of 4 – 20 mA DC is provided which is directly proportional to the instantaneous volumetric flow rate.
Full Bore Electromagnetic Flow Metercan be used for precise flow measurement of all electrically conductive liquids such as sledges, slurries, sewage, milk, water and waste water.
Electromagnetic flow meter has many applications across many industries
Specifications:
| Humidity | 90 % R.H. max. Non-condensing |
| Input | Micro-volt signal proportional to flow rate from Flow Tube |
| Outputs | 4 – 20 mA dc in max. 110 Ohms – Proportional (0 – 100 % flow rate) |
| Flow rate | m³/hr, Lit/hr, Lit/min & Lit/sec |
| Min. Media | 5 µSiemens / cm (Conductivity) |
| Coil Excitation | Pulsed DC |
| Flow Velocity | a) 1.25m/s, b) 2.5m/s, c) 5.0m/s, d) 10.0m/s b) V=0.3m/s, b) V=1m/s, c) V=12m/s |
| Accuracy | ± 1% (10 % to 90 % of calibrated range in ref. conditions) |
| Ref. Conditions | Power supply nominal ± 10% Temperature 27oC ± 2oC |
| Repeatability | ± 0.2 % of reading |
| Ingress Protection | IP – 65 Equivalent |
Additional Information:
Product Details:
| Application Media | Water |
| Display | Digital |
| Brand | DMS |
| Flow range | 50-500 L/min |
| Repetability | Upto 0.05% |
Product Details:
| Display | Digital |
| Brand | DMS |
| Flow range | Upto 500 l/min |
| Application | Laboratory |
| Diameter | 60 mm 3 inch |
